INCH - POUND
MIL-DTL-5882E
17 September 2013
Superseding
MIL-T-5882D
20 JULY 1989
DETAIL SPECIFICATION
TRANSMITTER, PRESSURE, MULTIPURPOSE,
0-50 PSI, MS28005-1
This specification is approved for use by Department of the Air Force and is available for use by
all Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of remote indicating, 320 degrees
movement synchro style, general purpose pressure gage transmitter.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.1.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-5350
-
Transmitters, Synchro Operated, Aircraft General
Specification For
MIL-I-7085
-
Indicator, Pressure, Multipurpose, 0-50 Psi
MIL-B-27497
-
Bearings, Jewel, Sapphire, Synthetic
Comments, suggestions, or questions on this document should be addressed to Oklahoma City Air
Logistics Center/ENSDAA, 3001 Staff Drive, Tinker AFB, OK 73145 or emailed to
tinker.dsp@tinker.af.mil. Since contact information can change, you may want to verify the
cuEPncRTMtENTddFeDEFfoNSEtiSTANng tRe ASSIST Online database at https://assist.dla.mil.
DrreA y of his a O r ss inE rma on usiDAh DS
AMSC N/A
FSC 6620
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business