INCH-POUND
MIL-DTL-9398D
20 July 2007
SUPERSEDING
MIL-G-9398C
30 June 1966
DETAIL SPECIFICATION
GENERATOR, TACHOMETER, TWO-POLE, HIGH
TEMPERATURE, AIRCRAFT
Inactive for new design after 14 September 1998.
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE. This specification covers two-pole, alternating current; tachometer generators
designated MS25038-4 for use on turboprop and turbojet engines.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616 or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6620
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business