INCH-POUND
MIL-DTL-27188C
19 December 2006
SUPERSEDING
MIL-I-27188B
30 April 1994
DETAIL SPECIFICATION
INDICATOR, PRESSURE EGU-2/A,
OIL, 0-100 PSI
Inactive for new design after 28 September 1999.
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for one type of hermetically
sealed, remote indicating, synchro-style, integrally lighted, oil pressure indicator, designated
EGU-2/A.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616 or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6620
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business