INCH POUND
MIL-PRF-38230D
26 FEBRUARY 2008
SUPERSEDING
MIL-PRF-38230C(USAF)
1 October 1997
PERFORMANCE SPECIFICATION
TRANSMITTER, PRESSURE, OIL, VARIABLE RELUCTANCE
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1.
SCOPE
1.1
Scope. This specification covers oil pressure transmitters.
1.2
Classification. Transmitters will be of the following type, as specified (see 6.2):
TRU-66/A
100 percent (200 psi) overpressure
2
APPLICABLE DOCUMENTS
2.1
General. The documents listed in this section are cited in sections 3 and 4 of this
specification. These lists do not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of these lists, document users are cautioned that they must meet the
requirements specified in the documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
Government documents.
2.2
2.2.1 Specifications standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Oklahoma City
Air Logistics Center/ENEP, 3001 Staff Drive, Suite 2AG68A, Tinker AFB, OK 73145-3036, or
emailed to ocalc.enrs.sma@tinker.af.mil. Since contact information can change, you may want
to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6620
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business