MIL-PRF-5350G
(RTCA documents may be obtained at www.rtca.org or addressed to RTCA Inc., 1828 L
Street, NW, Suite 805, Washington, DC 20036.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE AS20708
- Synchros, General Specification For
(SAE documents may be obtained at https://www.sae.org or from Society of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale PA 15096.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Associated specifications. The individual item requirements shall be as specified in the
associated specification and herein (see 6.2). In the event of any conflict between the
requirements of this specification and the associated specification, the latter shall govern.
3.2 First article or qualification. The requirement for first article or qualification shall be
imposed by the associated specification (see 4.2, 4.3, 6.2, and 6.4).
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible,
provided that the material meets or exceeds the operational and maintenance requirements,
and promotes economically advantageous life cycle costs.
3.4 Materials. Materials shall produce no toxic, corrosive, or deleterious fumes and shall be
resistant to corrosion due to electrolytic decomposition, fungus, fuels, salt fog, and any
other atmospheric condition that may be encountered during operational use or storage.
Nonmagnetic materials shall be used except where magnetic materials are essential.
3.5 Interface.
3.5.1 General. Transmitters conforming to this specification shall operate with indicators
conforming to MIL-I-7057.
3.5.2 Adjustments. No special tools shall be required to adjust the transmitter. Hermetically
sealed cases (see 6.3.1) shall have a means of adjustment accessible from the exterior of the
case. It shall provide a range of at least 14° of scale adjustment.
3.5.3 Electrical connectors. The transmitter electrical connector shall be as specified in the
acquisition document (see 6.2). If not so specified, the connector shall be in accordance
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business