INCH-POUND
MIL-DTL-5790H
9 June 2008
SUPERSEDING
MIL-DTL-5790G
10 January 2003
DETAIL SPECIFICATION
TRANSMITTER, PRESSURE, OIL, SYNCHRO,
0-200 PSI 320-DEGREE MOVEMENT, 26V,
SINGLE PHASE, 400 CYCLES
Inactive for new design after 28 September 1999.
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of remote indicating, 320-degree movement,
synchro style, differential, oil pressure transmitter.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616 or e-mailed to STDZMGT@dla.mil. Since contact information can change, you may want
to verify the currency of this address information using the ASSIST data base at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6620
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business