MIL-DTL-5790H
ASTM INTERNATIONAL
ASTM B 117
- Standard Practice for Operating Salt Spray (Fog)
Apparatus.
(Application for copies should be addressed to the ASTM International, 100 Barr Harbor
Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. Electronic copies may be
obtained from https://www.astm.org/.)
RADIO TECHNICAL COMMISSION FOR AERONAUTICS (RTCA)
RTCA DO-160
- Environmental Conditions and Test Procedures for
Airborne Equipment.
(Application for copies should be addressed to the Radio Technical Commission for
Aeronautics, Inc., 1828 L Street, NW, Suite 805, Washington, DC 20036. Electronic copies may
be obtained from https://www.rtca.org/.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE AS20708
- Synchros, General Specification for.
(Application for copies should be addressed to the Society of Automotive Engineers,
400 Commonwealth Drive, Warrendale, PA 15096-0001. Electronic copies may be obtained
from https://www.sae.org/.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The transmitters furnished under this specification shall be products that
are authorized by the qualifying activity for listing on the applicable qualified products list (QPL)
at the time set for opening of bids (see 4.3 and 6.3).
3.2 Design and construction. The transmitter shall be designed for use with a pressure
indicator conforming to MIL-I-7087. The dimensional requirements shall conform to MS28005-3
except the 2.625 ± 0.005 inch bolt circle may be 2.625 ± 0.016 inch. The transmitter shall be
constructed so that no parts will work loose due to strains, jars, vibrations, and other conditions
incident to shipment, storage, installation, and service. Pivots, bearings, and gears shall neither
bind nor shake and shall be as nearly frictionless as possible.
3.2.1 Materials. Materials used in the construction of the transmitter shall produce no toxic or
deleterious fumes and shall be resistant to corrosion due to electrolytic decomposition, fungus, fuels,
salt fog, and any other atmospheric condition that may be encountered during operational use or
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business