A.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

MIL-DTL-38394E

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-5541

- Chemical Conversion Coatings on Aluminum and

Aluminum Alloys.

MIL-DTL-6856

- Indicator, Pressure, Synchro, 1-1/2 Inch.

MIL-I-7057

- Indicators, Synchro, Aircraft, General Specification for.

MIL-A-8625

- Anodic Coatings for Aluminum and Aluminum Alloys.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-130

- Identification Marking of U.S. Military Property.

MIL-STD-461

- Requirements for the Control of Electromagnetic

Interference Characteristics of Subsystems and Equipment.

MIL-STD-810

- Environmental Engineering Considerations and Laboratory

Tests.

MIL-STD-889

- Dissimilar Metals.

MIL-STD-1916

- DoD Preferred Methods for Acceptance of Products.

MS33678

- Connector, Receptacle, Electric, Integral Mounting.

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-781

- Reliability Test Methods, Plans, and Environments for

Engineering, Development, Qualification, and Production.

MIL-HDBK-831

- Preparation of Test Reports

MIL-HDBK-5400

- Electronic Equipment, Airborne, General Guidelines for.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/

or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,

Philadelphia, PA 19111-5094.)

2.2.2 Specifications, Standards, and handbooks (specific revision). The following

specifications, standards, and handbooks of the exact revision listed below form a part of this

specification to the extent specified herein.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-704A

- Aircraft Electric Power Characteristics. (dated 9 August

1966)

MIL-STD-810C

- Environmental Engineering Considerations and Laboratory

Tests. (dated 10 March 1975, Vibration tests only)

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/

or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,

Philadelphia, PA 19111-5094.)