MIL-DTL-38394E
2.3 Non-government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract (see 6.2).
SAE INTERNATIONAL
SAE-AMS-QQ-S-763 - Steel, Corrosion Resistant, Bars, Wire, Shapes, and
Forgings (DoD adopted).
SAE-AS8879
- Screw Threads - UNJ Profile, Inch Controlled Radius Root
with Increased Minor Diameter (DoD adopted).
SAE-AS20708
- Synchros, General Specification for (DoD adopted).
SAE-AS5202
- Port or Fitting End, Internal Straight Thread, Design
Standard (DoD adopted).
(Copies of these documents are available online at https://www.sae.org/ or from
SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
AEROSPACE INDUSTRIES ASSOCIATION (AIA)
NASM21209
- Insert, Screw Thread, Coarse and Fine, Screw Locking,
Helical Coil, Cres (DoD adopted).
(Copies of these documents are available online at https://www.aia-aerospace.org/ or from
the Aerospace Industries Association, 1000 Wilson Boulevard, Suite 1700, Arlington, VA 22209.)
AMERICAN BEARING MANUFACTURERS ASSICIATION (ABMA)
ABMA 12.1
- Instrument Ball Bearings, Metric Design
ABMA 12.2
- Instrument Ball Bearings, Inch Design
(Copies of these documents are available online at https://www.abma-dc.org/ or from
American Bearing Manufacturers Association, 2025 M Street, NW, Suite 800, Washington, DC
20036.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this document
takes precedence. Nothing in this document, however, supersedes applicable laws and regulations
unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. Transmitters furnished under this specification shall be products that
are authorized by the qualifying activity for listing on the applicable qualified products list
(QPL) before contract award (see 4.3 and 6.3).
3.2 Materials. Materials used in the manufacture of transmitters shall be suitable for the
purpose and shall conform to applicable government specifications. Materials conforming to
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business